2x Enerdrive 300Ah Lithium Battery Bundle
*Bundle includes 2x Enerdrive 300Ah 12V Lithium Batteries
Never Run Out Of Power Again
The 2x Enerdrive 300Ah Lithium Battery Bundle is your go to solution for high capacity storage, designed to meet the demanding needs of those seeking high amp hour capacity in a single battery bank.
Connected with Bluetooth Smart Phone Monitoring
The Enerdrive B-TEC G2 battery takes innovation to the next level by incorporating Bluetooth Battery Monitoring. You can easily monitor essential information such as:
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Ideal for a Range of Applications
Whether you’re into camper trailers, 4WD adventures (AUX battery), caravans, boats, watercraft, or an off-grid lifestyle, or any other application demanding high amp hour capacity, the Enerdrive 300Ah Lithium Battery is your trusted partner.
Get your New Year Specials on 2x Enerdrive 300Ah Lithium Battery Bundle from KVA Generator.
Order online by clicking the add to cart button now and we will deliver these batteries to your door via our express shipping option.
Only logged in customers who have purchased this product may leave a review.
Specifications
| Specification |
EPL-300BT-12V G2 |
| Nominal Voltage |
12.8V |
| Nominal Capacity |
300Ah |
| Cycle Life (DOD – 80% under controlled conditions) |
≥ 2000 Cycles |
| Standard Charge Specification (Lithium profile charger required) |
|
| Battery Charge Temperature |
0 ̴ 45°C |
| Normal Charge Voltage CV/CC* |
14.20 ̴ 14.60V |
| Standby (Float) Voltage |
13.50 ̴ 13.80V |
| Maximum Charge Current |
190A @ 25°C for 30mins |
| Recommended Charge Current |
60~120A |
| Standard Discharge Specification |
|
| Battery Discharge Temperature |
-20 ̴ 60°C |
| Battery Output Voltage Range |
11.00 ̴ 14.60V |
| Maximum Discharge/Pulse Current |
250A @ 25˚C ±5˚C for 15 mins |
| Pulse Discharge Current |
450A for 1.0s |
| Discharge Cut-off Voltage |
≤11.20V |
| Circuit Protection |
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. |
| Over-Charge Protection |
|
| Over-charge Protection Per Cell |
3.90V ± 0.03V |
| Over-charge Release Per Cell |
3.60V ± 0.05V |
| Over-charge Release Method |
Discharge below release voltage |
| Over-Discharge Protection |
|
| Over-discharge Protection Per Cell |
2.80V ± 0.05V |
| Over-discharge Release Per Cell |
3.20V ± 0.05V |
| Over-discharge Release Method |
Apply Charge/Voltage ≥12.8V |
| Battery Manual Reset Button |
Yes |
| Over Current Protection |
|
| Discharge Over Current |
280A for 25s – 400A for 3.5s |
| Protection Reset Time |
Approx 10s Auto Release |
| Over Current Release Method |
Disconnect Load |
| Over Temperature Protection |
|
| Battery Discharge Over Temperature |
Protection to 65°C ± 5°C |
| Release at 50°C ± 5°C |
|
| Battery Charge Over Temperature |
Protection to 55°C ± 5°C |
| Release at 45°C ± 5°C |
|
| Short Circuit Protection |
Auto release after 5s |
| Dimensions |
|
| Length |
521mm |
| Width |
280mm |
| Height |
238mm |
| Weight |
Approx 38.2 Kg |
| Case Construction |
Hi Impact ABS Plastic |
| Storage Information |
|
| Temperature & Humidity Range |
≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH |
| ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH |
|
Please note that specifications are subject to change without notice.
Reviews
There are no reviews yet.